Asus DSBF-D Series Manual page 167

Managing hot spares Managing hot spares Managing hot spares Managing hot spares Managing hot spares
You may configure one disk as a global hot spare to protect critical data on
the IM/IME volume(s). You may create the hot spare disk at the same time
you create the IM/IME volume. Refer to this section when adding a hot
spare disk on an existing volume.
If a disk on an IM/IME volume fails, the utility automatically rebuilds the
failed disk data on the hot spare. When the failed disk is replaced, the
utility assigns the replacement as the new hot spare.
To create a hot spare:
1. Follow steps 1 ~ 3 of the section "Viewing volume properties."
2. From the View Array screen, select M a n a g e A r r a y
<Enter>.
3. From the Manage Array screen select M a n a g e H o t S p a r e
press <Enter>.
A S U S D S B F - D S e r i e s A S U S D S B F - D S e r i e s
A S U S D S B F - D S e r i e s A S U S D S B F - D S e r i e s A S U S D S B F - D S e r i e s
M a n a g e A r r a y, then press M a n a g e A r r a y M a n a g e A r r a y
M a n a g e A r r a y
M a n a g e H o t S p a r e, then M a n a g e H o t S p a r e M a n a g e H o t S p a r e M a n a g e H o t S p a r e
5 - 5 1 5 - 5 1
5 - 5 1 5 - 5 1 5 - 5 1