Table of Contents
Advertisement
5.
When initialization is completed, press <Esc>.
Using the Objects command
Using the Objects command
Using the Objects command
Using the Objects command
Using the Objects command
To initialize the logical drives using the O b j e c t s
1.
From the Management Menu, highlight O b j e c t s
5 - 2 0
5 - 2 0
5 - 2 0
5 - 2 0
5 - 2 0
O b j e c t s
O b j e c t s
O b j e c t s command:
O b j e c t s
O b j e c t s
O b j e c t s
O b j e c t s, then press <Enter>.
O b j e c t s
C h a p t e r 5 : R A I D c o n f i g u r a t i o n
C h a p t e r 5 : R A I D c o n f i g u r a t i o n
C h a p t e r 5 : R A I D c o n f i g u r a t i o n
C h a p t e r 5 : R A I D c o n f i g u r a t i o n
C h a p t e r 5 : R A I D c o n f i g u r a t i o n
Advertisement
Table of Contents
