Asus DSBF-D Series Manual page 39

2. Use a Phillips screwdriver to
tighten the four heatsink screws
in a diagonal sequence.
3. Connect the fan cable to the
4-pin connector labeled
CPU_FAN1.
Do not forget to connect the
CPU fan cable! Hardware
monitoring errors may occur if
you fail to plug this connector.
4. Repeat steps 1 to 3 to install the other heatsink if you have installed a
second CPU, then connect the fan cable to the 4-pin connector
labeled CPU_FAN2.
A S U S D S B F - D S e r i e s A S U S D S B F - D S e r i e s
A S U S D S B F - D S e r i e s A S U S D S B F - D S e r i e s A S U S D S B F - D S e r i e s
C P U _ F A N 1 C P U _ F A N 1 C P U _ F A N 1 C P U _ F A N 1 C P U _ F A N 1
c o n n e c t o r c o n n e c t o r c o n n e c t o r c o n n e c t o r c o n n e c t o r
2 - 1 5 2 - 1 5
2 - 1 5 2 - 1 5 2 - 1 5