Table of Contents
Advertisement
3.5.16 Date (of Month) Alarm, Time (hh:mm:ss) Alarm
Set these options to specify the RTC Alarm time on Date / Hour /
Minute / Second.
3.5.17 IRQ 8 Break Suspend
To enable or disable the detection of IRQ 8 (RTC) event for power down
state transition.
3.5.18 IRQ[3-7, 9-15], NMI
To enable or disable the detection of IRQ 3-7, IRQ 9-15 or NMI
interrupt events for power down state transition.
3.5.19 Primary/Secondary IDE 0/1, Floppy Disk, Serial & Parallel Port
These items enable or disable the detection of IDE, floppy, serial and
parallel port activities for power down state transition. Actually it detects
the read/write to/from I/O port.
3.6 PNP/PCI Configuration Setup
Figure 3.6 PNP/PCI CONFIGURATION SETUP
ROM PCI / ISA BIOS (XXXXXXXX)
PNP/PCI CONFIGURATION
AWARD SOFTWARE, INC.
36
Advertisement
Table of Contents
