Table of Contents
Advertisement
4.4.3
PCI/PnP Configuration
The PCI/PnP Configuration menu items allow you to change the advanced settings
for PCI/PnP devices. The menu includes setting IRQ and DMA channel resources
for either PCI/PnP or legacy ISA devices, and setting the memory size block for
legacy ISA devices.
Take caution when changing the settings of the PCI/PnP Configuration menu
items. Incorrect field values can cause the system to malfunction.
Advanced
PCI/PnP Settings
Reset ESCD Data
Plug & Play O/S
Palette Snooping
Onboard LAN1 Configuration
Onboard LAN2 Configuration
PCI Slot 1 Configuration
PCI Slot 2 Configuration
PCI Slot 3 Configuration
PCI Slot 5 Configuration
Reset ESCD Data [No]
Clears the non-volatile RAM (NVRAM) during boot.
Configuration options: [No] [Yes]
Plug & Play O/S [No]
When set to [No], BIOS configures all the devices in the system. When set to
[Yes] and if you install a Plug and Play operating system, the operating system
configures the Plug and Play devices not required for boot.
Configuration options: [No] [Yes]
Palette Snooping [Disabled]
When set to [Enabled], the palette snooping feature informs the PCI devices that
an ISA graphics device is installed in the system so that the latter can function
correctly. Configuration options: [Disabled] [Enabled]
4-22
[No]
[No]
[Disabled]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
Clear ESCD during
System Boot.
Select Screen
←→
Select Item
↑↓
+-
Change Option
F1
General Help
F10
Save and Exit
ESC
Exit
Chapter 4: BIOS setup
Advertisement
Table of Contents
