Circontrol Wallbox eNext Series Installation Manual page 8

Wallbox eNext Series Installation Manual
2
I M P O R TA N T E L E C T R I C A L S A F E T Y I N S T R U C T I O N S
A safe work environment is not enough to control all potential electrical hazards. It is
recommended to be very cautious and work safely. So, the safety rules shown below
could help to control risks of injury or death from workplace hazards.
• Avoid
electrical circuits.
• Disconnect the power source before
servicing or repairing electrical
equipment. The only way to be sure.
• Use only tools and equipment with
non-conducting
working
Easier to check.
• Never use metallic pencils or
rulers, or wear rings or metal
watchbands when working with
electrical equipment. This rule is
very easy to forget, especially when
you are showing some electrical
part pointing with metallic pencil.
• Enclose all electric contacts and
conductors so that no one can
accidentally come into contact.
04
Read carefully all the instructions before starting in
order to ensure properly handling of electrical parts.
contact with energized
handles when
on electrical devices.
• When it is necessary to handle
equipment that is plugged in, be
sure hands are dry and, when
possible, wear
gloves, protective
shoes with insulated soles.
• If it is safe to do so, work with only
one hand, keeping the other hand
at your side or in your pocket, away
from all conductive material. This
precaution reduces the likelihood
of accidents that result in current
passing through the chest cavity.
• Never handle electrical equipment
when hands, feet, or body are wet
or perspiring, or when standing on
a wet floor.
nonconductive
clothes and