Figure 5-11 Prying Open The Fuse Block Cover On Fps Front Panel; Figure 5-12 Extracting The Fuse Block From The Fps; Figure 5-13 Fuse Block Removed From Fps - ferrotec Temescal CV-6SLX User Manual

5.5 FPS Fuse Replacement Procedure

Figure 5-11 Prying Open the Fuse Block Cover on FPS Front Panel

CV-6SLX User Manual
9 Using a flat-bladed screwdriver, pry open the fuse block's cover as
shown in Figure 5-11.
10 Using the same screwdriver, pry the fuse block out of its
holder, as shown in Figure 5-12. Figure 5-13 shows the fuse
block extracted from its holder.

Figure 5-12 Extracting the Fuse Block from the FPS

Figure 5-13 Fuse Block Removed from FPS

11 Check the fuses and replace them as necessary.
5-30
Section 5: Troubleshooting
0101-8242-0, Rev. C