Symbol Definitions - Extron electronics DSC 3G-HD A User Manual

Symbol Definitions

• = Space
] ]
= Carriage return with line feed
} or | }
= Carriage return with no line feed
E or E
W = Escape
24
= Superscripts indicate the error message displayed if the command is entered incorrectly
*NOTE: Values with an asterisk (
X@ X@
= Input video format for DSC 3G-HD A:
0 = No signal detected on the current input
1 = SD – 480i
2 = SD – 576i
3 = HD – 480p, 576p, 720p, 1080i, 1080p (up to 30 Hz)
4 = 3G – 1080p (@ 50, 59.94, and 60 Hz), 2K
5 = Unknown
X# X#
= Input video format for DSC HD-3G A:
0 = No signal detected on the current input
1 = HDMI
2 = DVI
3 = Invalid signal
X$ X$
Horizontal or vertical start — 0 through 255 (default midpoint = 128)
=
Response is three digits, padded with zeros.
X^ X^
= Total lines:*
DSC 3G-HD A: View only
DSC HD-3G A:
Response is four digits, padded with zeros.
X& X&
= Total pixels:*
DSC 3G-HD A: View only
DSC HD-3G A:
Response is four digits, padded with zeros.
X* X*
= Active pixels:*
DSC 3G-HD A: View only
DSC HD-3G A: ±512 of the default value
Response is four digits, padded with zeros.
X( X(
= Active lines:*
DSC 3G-HD A: View only
DSC HD-3G A: ±256 of the default value
Response is four digits, padded with zeros.
X1) X1)
= On or off (enable or disable)
0 = Off or disable
1 = On or enable
X1@ X1@
= Internal temperature (in degrees Celsius)
Response is two digits, padded with a zero.
X1# X1#
= Horizontal and vertical frequencies
Format is three digits with a single decimal place and leading zeros. Example: 075.3
X1$ X1$
= Text label or preset name (up to 16 characters)
NOTE:
X1% X1%
Picture adjustment — 0 to 127 (default 64
=
Response is three digits, padded with zeros.
or with invalid parameters (see
*
) depend on the resolution.
±512
of the default value
±512
of the default value
User and input presets saved without a name are given the default names
User Preset nn (for example, User Preset 11) or Input Preset nnn (for
example, Input Preset 005).
DSC 3G-HD A and DSC HD-3G A • Remote Configuration and Control
Error Responses on the previous page).
)
42