Sony Power HAD FX HSC300R Service Manual page 130

Calling
Reference: Refer to step 2 of "Outline Figure of Operation". Refer to "5-1-1. Structure of Paint Related Files".
Using PAINT Menu of This Unit
Temporary paint (values of each item) and selection of scene file are reset, and the state when the reference file was
stored is resumed.
[PAINT] → [SCENE FILE] → [STANDARD]
With MSU (Master Setup Unit)
Pressing the STANDARD button in the camera/panel control area on the operation panel restores the state when the
reference file was stored.
Reading the Reference File from the USB Drive
Reference: Refer to step 3 of "Outline Figure of Operation".
Using FILE Menu of This Unit
Reference File data stored in the camera can be changed by reading the Reference File data stored in the USB drive.
[FILE] → [REFERENCE] → [READ (USB → CAM)]
Note
Reference file data stored in the USB drive cannot be read when the power is just turned on.
Storing the Reference File in the USB Drive
Reference: Refer to step 4 of "Outline Figure of Operation".
Using FILE Menu of This Unit
Stores the reference file stored in the camera to the USB drive.
[FILE] → [REFERENCE] → [WRITE (CAM → USB)]
Initializing All File Items
Reference: Refer to step 5 of "Outline Figure of Operation".
Using FILE Menu of This Unit
Re-set the reference file to the factory settings (default value: 0).
[FILE] → [FILE CLEAR] → [REFERENCE (ALL)]
5-8
HSC300RF/HSC100RF/HSC300R/HSC100R