Mb-1207 Board - Sony Power HAD FX HSC300R Service Manual

2-11.

MB-1207 Board

Preparation
1. Remove the inside panel. (Refer
2. Open the outside panel assembly.
• HSC300R/100R: Refer
• HSC300RF/100RF: Refer
3. Remove the front assembly. (Refer
4. Remove the CD-78 board. (HSC300R/100R) (Refer
5. Remove the SDI-117 board. (HSC300RF/100RF) (Refer
6. Remove the DPR-358 board. (Refer
7. Remove the SY-430 board. (Refer
8. Remove the power supply assembly. (Refer
Procedure
1. Disconnect the six harnesses from the six connectors (CN1, CN5, CN6, CN8, CN9, CN10) on the MB-1207
board.
2. Remove the two screws and remove the MB bracket in the direction of the arrow.
HSC300RF/HSC100RF/HSC300R/HSC100R
to"2-1. Inside Panel")
to"2-2-1. Outside Panel Assembly (TRIAX)"
to"2-3-1. Outside Panel Assembly (Fiber)"
to"2-4-1. CCD Unit (HSC300R/300RF)")
to"2-5. CD-78 Board
to"2-6. SDI-117 Board
to"2-7. DPR-358 Board")
to"2-9. SY-430 Board/AT-189
to"2-10. Power Supply
(HSC300R/100R)")
(HSC300RF/100RF)")
Board")
Assembly")
2-28