Board (Triax) - Sony Power HAD FX HSC300R Service Manual

2-2-2. TX-148 Board (TRIAX)
Preparation
1. Remove the outside panel assembly. (Refer
Procedure
1. Remove the four screws to detach the shield case.
PSW3 x 6
2. Disconnect the coaxial cable from the connector on the TX-148 board.
3. Remove the four screws to detach the TX-148 board.
TX-148 board
PSW3 x 6
4. Install the removed parts by reversing the steps of removal.
HSC300RF/HSC100RF/HSC300R/HSC100R
to"2-2-1. Outside Panel Assembly
Shield case
Connector
PSW3 x 6
PSW3 x 6
(TRIAX)")
PSW3 x 6
Coaxial cable
2-3