Intercom Settings; Talk (Microphone) Settings; Receive (Headphone) Settings - Sony Power HAD FX HSC300R Service Manual

1-12.

Intercom Settings

Since there are several types and usages of the headset for intercom, make appropriate settings for each type.
1-12-1.

Talk (Microphone) Settings

Check characteristics of the microphone attached to the headset and make settings by the menu of the unit. Microphone
sensitivity, power supply method, balanced/unbalanced input can be set.
General Carbon Microphone
1. Set INTERCOM MIC on the HEAD SET page of the OPERATION menu to "CARBON".
Microphone sensitivity, power supply method, balanced/unbalanced input are automatically set.
General Dynamic Microphone
1. Set INTERCOM MIC on the HEAD SET page of the OPERATION menu to "DYNAMIC".
2. Set "UNBAL" on the HEAD SET page according to the microphone.
Microphone sensitivity and power supply method are automatically set.
Other Microphones
1. Set INTERCOM MIC on the HEAD SET page of the OPERATION menu to "MANUAL".
2. Set the following items on the HEAD SET page according to the microphone to be used.
• LEVEL (microphone sensitivity)
• POWER (power supply method)
• UNBAL (balanced/unbalanced input)
1-12-2.

Receive (Headphone) Settings

Headphone operation varies depending on the headset connection.
The following description is provided when the right ear is connected to Pin 5 of the intercom connector and the left ear
is connected to Pin 4 of the intercom connector.
In the Case of Dual-type Headphone to Listen the Same Sound with Both Ears or Single-
type Headphone
1. Set "INTERCOM RECEIVE SELECT" on the INTERCOM page of the OPERATION menu to "MIX". The same
sound is output from right and left.
In the Case of Dual-type Headphone to Listen Different Right and Left Sound
1. Set "INTERCOM RECEIVE SELECT" on the INTERCOM page of the OPERATION menu to "SEPARATE".
2. Set channels (left, right, and both) of items INTERCOM, PGM1, PGM2, and TRACKER on the INTERCOM
page.
HSC300RF/HSC100RF/HSC300R/HSC100R
1-31