Using The Table; Before Placing The Table In Service; General Guidelines For Use; Swivel Locks - Ferno 103 User Manual

Combination table
Table of Contents

Advertisement

Using the Table

5.1 before Placing the Table in service

Personnel who will work with the table need to read this
manual.
Set up the table, following the instructions in the
on pages 8 and 9.
Confirm that the table operates properly. See
Table, page 12.

5.2 general guidelines for Use

The table is for professional use only, by a trained operator.
Follow standard mortuary-service procedures when using
the table.
Lift only the weight you can safely handle. Use additional
help when working with a heavy body.

5.3 swivel locks

Each of the four wheels is fitted with a locking caster. Lock the
casters to help hold the table steady and unlock the casters to roll
the table.
To lock a caster, turn the swivel lock toward the end of the
table (Figure 5).
To unlock the caster, turn the swivel lock toward either of the
long sides of the table (Figure 5).
To help prevent the table from rolling during use, lock the
casters at 90° angles as shown in Figure 6:
(1) Align two wheels of opposite corners parallel to the
long sides of the table and lock them.
(2) Turn the remaining two wheels perpendicular to the
long sides of the table and lock them.
10
5 - Using The Table
Setup section
Inspecting the
Model 103 Combination Table
Warning
improper operation can cause injury. Operate
the table only as described in this manual.
Operation Requires
One Trained Operator
Figure 5 - Using the Swivel Lock
Caster (4)
Figure 6 - Configuring the Casters
To Hold the Table Stationary
© Ferno-Washington, Inc 234-0037-05 August 2009
Load Limit

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents