About The Table; Description; General Specifications - Ferno 103 User Manual

About the Table

3.1 Description

The Model 103 Combination Table (called the table in this
manual) is a mortuary-service product designed to provide
an adjustable surface for embalming, transfer, and dressing.
The table-top is constructed of stainless steel. The table has
a total of seven level locking positions and can be adjusted
between 31-1/2" and 37-1/2" at one or both ends. The table-
top is convex and has a deep perimeter trough to guide fluids
to a drain at the foot end.
The table has 6" (15 cm) caster wheels that swivel and lock.
inClUDeD WiTh PUrChase
A 3/16" Allen wrench is included with the purchase of a
table.

3.2 general specifications

Height
Minimum
Maximum
Length
Width (Overall)
Wheelbase
Weight
Load Limit
General specifications are rounded to the nearest whole number.
Metric conversions are calculated before rounding the Imperial
measurements. For more information, contact Ferno Customer
Relations (page 2) or your Ferno distributor.
Ferno reserves the right to change specifications without notice.
6
3 - abOUT The Table
31-1/2 in./80 cm
37-1/2 in./95 cm
80 in./205 cm
30 in./77 cm
27 x 53 in./69 x 135 cm
80 lb/36 kg
1000 lb/454 kg
Model 103 Combination Table
Warning
improper use of the table can cause injury. Use
the table only for the purpose described in this
manual.
Inspect the table if the load limit
has been exceeded (See Inspecting
the Table, page 12).
To request additional free users' manuals,
contact Ferno Customer Relations, your
Ferno distributor, or visit www.ferno.com.
© Ferno-Washington, Inc 234-0037-05 August 2009
load limit
Users' ManUal