Zyper Management Platform - ZeeVee Quad ZyPer4K User Manual
Encoder card for netgear m4300-96x
Hide thumbs
Also See for Quad ZyPer4K:
- User manual (121 pages) ,
- Configuration manual (16 pages) ,
- User manual (44 pages)
Table of Contents
Advertisement
ZyPer4K
ZyPer Management Platform
Each Z4KNGENC4 card installed in the system will show up as 4 independent ZyPer4K
encoders in the ZyPer Management Platform.
By default each encoder will be identified by its unique MAC address.
Example MAC: 80:1F:12:5D:8E:AB
Port MAC addresses can be found labeled on the underside of the card. Ports are numbered
from left to right.
The user can rename all of the encoders as desired.
The ZyPer Management Platform will treat the modular encoders just like any other encoders in
the system and allow you to route audio, video and IR from the encoder to any number of
decoders. Audio, Video and IR can all be routed independently.
Please note the Product Limitations on page 4. Modular inputs cannot be routed to a Multi-view.
Z4K Quad Encoder
Page
6
of
11
Advertisement
Table of Contents
Need help?
Do you have a question about the Quad ZyPer4K and is the answer not in the manual?
Questions and answers