JOBO JOBOBIKE Bruno Owner's Manual page 7

Quick Release Levers
Quick release levers are for securing the seatpost and the front and back wheel to the bike. They allow the user to remove the front wheel
and to adjust the seatposts without tools. Since quick release levers could be loosened during transportation, or accidentally between or
during rides, it is important that you regularly check to ensure these components to be properly secured.
Suspension, Handlebar, Grips, and Seat Adjustments
The suspension fork on your E-bike affects the handling of the bike so you must understand how it works before use. The suspension fork
should be properly adjusted for your weight and terrain. Make sure that the handlebar and the handlebar stem are properly aligned, fitted
to the user, and secured to their corresponding, recommended torque values. Handlebar grips should not move easily at the ends of the
handlebar. Loose, worn, or damaged handlebar grips should be replaced before rides. The seat and seatpost should be properly aligned,
fitted to the user, and the seatpost quick release should be properly tightened, fully closed, and secured before riding.
Battery Charged, Secured, and Unplugged
Make sure that the battery is adequately charged and operating properly. The battery gauge on the LCD display and charging status indica -
tor on the battery should read similarly. Ensure the battery charger to be unplugged from the outlet and the battery to be stored in a safe
location before you ride. The battery MUST be locked onto the battery mount properly before use. Do no t operate the electrical system if
the battery is removed.
Accessories, Straps, and Hardware
Ensure all hardware to be secured and all approved accessories to be properly attached following the instructions of specific component's
manufacturer. It is always helpful to look over all hardware, straps, and accessories before each ride and, if you discover something wrong
or find something you are unsure of, have it checked by a certified bicycle mechanic.
Changing Components or Attaching Accessories
The use of non-original components or spare parts can jeopardize the safety of your E-bike, void your warranty and, in some cases, cause
your E-bike to not conform with laws pertaining to operating your bike.
Chargers produced by JOBOBIKE are the ONLY chargers that can be used for your bike. Using chargers that are NOT produ -
ced by JOBOBIKE would void your varranty. If any damages occur, our company does not take any responsibility.
6