JOBO JOBOBIKE Bruno Owner's Manual page 6

NOTICE:
A critical aspect of assembling your JOBOBIKE is securing the front and back wheel and checking the tightness of the rear wheel axle nuts.
All JOBOBIKEs use quick-release front wheels with bolt on rear wheels. These mechanisms may become less secured during shipment and
after use. The security and torque of all wheel mounting hardwares should be inspected upon arrival as well as on a regular basis. Both
wheels must be properly secured before operating your bike.
Safety Check Before Each Ride
In addition to regular maintenance, always check the condition of your bike before each ride. If you are unsure of how to conduct a com-
plete check of your bike's condition before every ride, you should consult a certified bike mechanic for assistance. See the "Safety Checklist"
section of this manual for more information.
Electrical System
The electrical system of your E-bike offers various levels of power assistance and lighting for different operating conditions and users' pref -
erences. It is critical that you familiarize yourself with all aspects of your E-bike's electrical system and check if everything is working cor-
rectly before each ride. The power assist should provide smooth, gradual acceleration when applied. If the power assist, pedal assistance,
or lighting is functioning abnormally, intermittently, or not working at all, please discontinue the use of your E-bike immediately and contact
our team for assistance.
Tyres and Wheels
Your wheels should always spin straight and must be repaired or replaced if they wobble from side to side or up and down when spinning. If
your wheels are loosened, which could happen after use, we recommend having a certified bike mechanic to tune the wheels of your E-
bike. Do not attempt to tune wheels or tighten spokes unless you have adequate knowledge, tools, and experience. Ensure the tyres and in -
ner tubes to be in good working condition with the correct amount of air pressure as indicated on the tyer sidewall and without any visual
damage. Always replace tyres and inner tubes if they have punctures, cuts, or damages before your rides. Ty res without the correct amount
of air pressure could reduce performance, cause tyres to wear faster, and make riding your bike dangerous. See the Tyre Inflation and Re-
placement section of this manual for more information.
5