Maintenance - JOBO JOBOBIKE Bruno Owner's Manual

• When storing your bike or carrying your bike on a rack for transport, unlock, remove the key, then remove the battery to reduce the
weight of the bike, which makes lifting and loading easier and protects the battery by transporting it in the cab of a vehicle.
• Avoid transporting E-bikes on a vehicle rack during rain, as this may cause water damage to the electrical components.

Maintenance

Basic Bike Care
To ensure safe riding conditions, you must maintain your bike properly. Follow these basic guidelines and see a certified bike mechanic at
regular basis to ensure your bike is safe for use and comfortable to ride. See the Safety Checklist and Recommended Service Intervals sec -
tions of this manual for more detailed information.
• Properly maintain batteries by keeping them fully charged when there are two weeks or longer between uses. See Long-Term Battery
Storage section of this manual for information on storing the battery for longer than two weeks between rides.
• Never immerse or submerge the bike or any components in any liquid as the electrical system may be damaged.
• Periodically check wiring and connectors to ensure that the connectors are secure without damages.
• To clean, wipe the frame with a damp cloth. If needed, apply a mild, non-corrosive detergent mixture to the damp cloth and wipe the
frame. Dry the frame by wiping with a clean, dry cloth.
• Store under shelter; avoid leaving the bike in the rain or to any corrosive materials. When the bike is exposed to rain, dry your bike and
apply anti-rust treatment to the chain and other unpainted steel surfaces.
• Riding on a beach or in coastal areas exposes your bike to salt, which is very corrosive. Wipe down your bike frequently and wipe or spray
all unpainted parts with anti-rust treatment. Damage from corrosion is not covered under warranty so take special care to extend the life of
your bike if you use it in coastal areas or areas with salty air or water.
• If the hub and bottom bracket bearings have been submerged in water or liquid, they should be taken out and re-greased. This will pre -
vent accelerated bearing deterioration.
• If the paint has become scratched or chipped in the metal, use touch up paint to prevent rust. Clear nail polish can also be used as a pre -
ventative measure.
• Regularly clean and lubricate all moving parts; tighten and adjust components as required.
32