JOBO JOBOBIKE Bruno Owner's Manual page 30

Switching Push-assistance Mode On/Off
To activate the push-assistance function, hold the "-" button. After 2s, The E-bike is activated at a uniform speed of 6 Km/h while the screen
displays " ". The push-assistance function is switched off as soon as you release the "-" button on the operating unit. The E-bike system
stops the power output immediately.Push-assistance Mode
Walk mode should be used only when the rider is off the seat with both hands on the handlebar. Always keep at least one hand on a brake
lever to allow quick cutoff of the motor if necessary and to maintain control of the bike.
Switching the Lighting On/Off and backlighting
29