Operation - JOBO JOBOBIKE Bruno Owner's Manual

Operation

NOTICE:Do not perform any of the steps in the Operation section of this manual until you have read this entire manual, since there are im -
portant details related to safety in the following sections.
Read and understand all sections of this entire manual before operating the bike for the first
time. There are important safety warnings throughout the whole manual that MUST be followed to prevent dangerous situations, accidents, damage to the
bike, damage to property, injury, or death. Users must follow the instructions and warnings in this manual for safety reasons. Do not attempt to operate your
bike until you have adequate knowledge about controlling and operating the bike. Damage caused by failing to follow instructions is not covered with war -
ranty and could result in dangerous situations, accidents, injury to you and others, damage to the bike, damage to your property, injury, or death. Contact
Jobobike if you have any questions about assembly or operation. Users must become accustomed to the bike's power control system before
operating.
Handlebar Features
1. LCD Display Remote
2. Bell
3. LCD Display
4. Shifter
5. Breake
LCD Display Controls
The display can be controlled manually using the 5-button LCD
display remote mounted on the left side of the handlebar (de-
picted at right).
1 ."+"button
2. Headlight switch key
3.The power button
4 .The information botton
5 -"-"button
Reference the LCD Display Operations table in this manual for instructions on
how to perform various operations using these buttons .
25