JOBO JOBOBIKE Bruno Owner's Manual page 31

To switch on the headlight, press the " " button. The backlight brightness is automatically reduced. Press the " " button again, the
lighting can be switched off.
If the display /Pedelec is switched on in a dark environment, the display backlight/headlight will automatically be switched on. If the display
backlight/headlight has been manually switched off, the automatic sensor
function is deactivated. You can only turn on the light manually. After
switching on the system again.
Assist Level Selection
Briefly press "+" or "-" button to switch between assistance levels so as to
change the motor output power, The default assistance level ranges from le-
vel "0" to"5", The output power is zero on Level "0". Level 1 is the minimum
power, and level 5 is the maximum power. When you press the "+" button
again after reaching level 5, the interface would still show "5", and blinks
at"5"to indicate that the power is already at its highest. After the power do-
wnshift reaches "0", if you press the "-" button again, the interface would still
show "0" and blinks at "0"to indicate that it has reached the power mini-
mum. The default value is level"1".
Assist Level Interface
To avoid accidental application of the twist power assist, while dismounted, ensure that the bike is powered off.
NOTICE: Even if you are an experienced bike user, please take time to read and implement the guidelines described in the owner's manual
that come with your E-bike, and any manuals included with subcomponents.
Battery SOC Indicator
The five battery bars represent the capacity of the battery. The five battery bars are bright when the battery is in high voltage. When the in-
dicator shows 0%, the battery needs to be recharged immediately. The table below show the various features and information displayed on
the LCD display. Battery and battery percentage indication
Driving Range
30
电