JOBO JOBOBIKE Bruno Owner's Manual page 28

9. Speed digital display: Display current speed value, the unit of the speed can be set in"Unit".
10. Power scale display/current scale display: Display current output value, the unit of the output can be set in"Power View".
11. Power assistant level display/walk assistance:
Display the seven levels as"0"/"1"/"2"/"3"/ "4"/ "5"/" ", briefly press (0.5S) or to switch the level.Touch and hold (2S)
startthe mode " walk assistance", display symbol.
12. Data: Display data, which corresponds to the current mode.
Start-Up Procecdue
After the bike has been properly assembled following the assembly video, all components are secured correctly, and you have read this en -
tire manual, you may turn on the bike and select a power level following the steps outlined below:
Switching the E-bike System On/Off
Press the power button to turn on the E-bike system.
When holding the power button for 2s, the E-bike system would be switched off. When turned off, the E-bike system no longer use s battery
power.When parking the E-bike for more than 10 minutes, the E-bike system switches off automatically.
Display Interface
After switching on the E-bike system, the display shows Speed and Trip Distance as default.
Briefly press (0.5s) "i" button to switch the display between the distance and speed; the cycle is: signal-trip distance (TRIP) → total distance
(ODO) → maximum speed (MAX) → average speed (AVG) → remaining distance (RANGE) → energy consumption (CALORIES) → time
(TIME).Energy consumption unit CALORIES means kCal.
27