JOBO JOBOBIKE Bruno Owner's Manual page 15

Step 5
Install the pedals.
Locate the pedal that has a smooth pedal axle exterior and a"R" stamp at the right end. The right pedal goes onto the crank on the right
side of the bike (which has the drivetrain gears and locates at the rider's right side when riding).Carefully thread the right pedal onto the
crank on the right side of the bike by hand. Do not cross thread or damage the threads.
The right pedal is threaded to tighten by turning clockwise (towards the bike's front).
The left pedal is reverse-threaded and tightens counterclockwise (towards the bike's back)
Left pedal tightens counter clockwise Right pedal tightens clockwise Letters ''L'' and ,,R'' on the pedal screws for left and right
Ensure that the remaining pedal has notches on the exterior of the axle and a "L" stamp at the left end of the axle, indicating it is the left
pedal. Carefully thread the pedal onto the left crank slowly by hand. Do not cross thread or damage the threads.
Torque each pedal to 35 Nm. Use a pedal wrench to avoid damage caused by wider wrenches.
14