ESDEC CLICKFIT BASIC Manual page 4

Standards, requirement and regulations
Upon installation of the mounting system, it is important to follow the installation instructions and the related standards for
the prevention of accidents. In particular, observe the following standards, requirements and regulations:
Building Decree Construction
•
PPE Personal Protective Equipment
•
KEMA Testing of Electrotechnical Materials
•
DIN 1055 Design loads for buildings
•
DIN 18299 General rules for all construction sectors
•
DIN 18451 Scaffolds
•
Removal and disassembly
Remove the product according to local laws and regulations. At the end of the life span all materials are recyclable.
Warranty
Warranty according to warranty conditions and terms of Esdec BV. These can be found on the website www.esdec.nl
Liability
The manufacturer accepts no liability for damage or injury caused by not (strictly) observing the safety regulations and
instructions in this manual or by carelessness during installation of the product mentioned in this document and any related
accessories.
• subject to misprints
Rev. 10.06.15 MANUAL MOUNTING SYSTEM FOR PITCHED ROOF WITH BITUMEN
.
02