Table Of Contents - ESDEC CLICKFIT BASIC Manual

TABLE OF CONTENT
1. Introduction
2. General installation conditions
3. Product description
4. Parts overview
4.1 Exploded-view
4.2 Bill of materials
5. Mounting preparation
5.1 Monitoring tools and accessories
5.2 Determining position of solar panels and measuring
5.3 Cleaning roof
6. Installation
6.1 Preinstall suspension sockets on solar panels (only with portrait)
6.2 Preinstall connecting strips
6.3 Attaching mounting brackets
6.4 Attaching mounting rail
6.5 Hanging solar panels to mounting rail (only with portrait)
6.6 Mounting 1st solar panel on the rail
6.7 Mounting other solar panels on the rail
6.8 Final assembly / multiple rows under each other
7. Annex
THIS INSTALLATION MANUAL SHOULD BE RETAINED WELL FOR FUTURE REFERENCE!
For the duration and conditions regarding warranty we recommend contacting your dealer. Furthermore, we refer to our General
Terms and Conditions of the sale which are available on request.
The manufacturer declines all responsibility for damage or injury resulting from failure to strictly follow this installation manual and
failure to observe normal caution in handling, installation and use of the ClickFit mounting system.
As a result of constant efforts to improve it may happen that the product differs in detail from what is described in this manual. For
this reason the given instructions serve only as a guideline for installing the product mentioned in this manual.
This manual has been prepared with all due care, but the manufacturer can not be held responsible for any errors in this manual or
the consequences thereof.
In addition, all rights are reserved and nothin may be reproduced from this manual in any way.
Rev. 10.06.15 MANUAL MOUNTING SYSTEM FOR PITCHED ROOF WITH BITUMEN
pag
1
1
3
3
3
4
5
5
6
6
7
7
7
8
9
10
11
12
13
14