Lincar Annarita 698 TP Using Instructions And Maintenance page 64

MENU 01 (clock setting)
Within this Menu you can adjust the time and the date of the electronic card, the set date and
time will be utilized as reference for the activation of the switch ON/OFF programs.
MENU02 (crono setting)
Within this Menu you can set up the automatic cycles of switching ON/OFF you desire to
utilize. There are 3 different modalities you can utilize, even contemporaneuosly, but pay
attention to not overlap the programmations.
PROGRAM DAY. The programmations inserted in this section will be repeated every day of
the week in the same way (max 2 ON/OFF cycles)
PROGRAM WEEK. With the programmations inserted in this section you can effect different
ON/OFF during the days of the week (max 4 ON/OFF cycles)
PROGRAM WEEK-END. The programmations inserted in this section will be repeated
exclusively on Saturday and Sunday (max 2 ON/OFF cycles).
MENU 03 (select language)
Within this Menu you can change the language utilized by the radiocontrol. There are 4
possibilities:
Italian English German French
MENU 04 (select feeler)
Within this Menu you can select in which way you want to take the room temperature. It is
possible to take the temperature by mean of the feeler put on the back of the appliance or by
mean of the feeler put on the radiocontrol. If you intend to use the feeler on the radiocontrol,
we suggest to fix the support of the radiocontrol in the coolest place of the room.
Alternatively on the lh side of the appliance the are 2 holes for the fixing of the support.
MENU 05 (status stand-by)
The appliance is preset to work in 2 (two) different modalities
st
1 Modality, -STAND-BY OFF- as prearranged by the factory.
Once the appliance has reached one of the selected temperature (room or boiler), it reduces
the power to the minimoum and the display signals "WORK MODULAT". The appliance
remains at the minimoum until one of the temperatures goes under the selected value. In case
the Mod. 698TP+698TPVT+698TPVT STEEL (including kit of sanitary water production)
is working in this modality, it is always ready for the production of sanitary water.
nd
2 Modality, -STAND-BY ON-.
Once the appliance has reached one of the selected temperature (room or boiler), it reduces
the power to the minimoum and the display signals "WORK MODULAT".
The appliance continues working at the minimoum, if at the minimoum power one of the
selected temperatures (room or boiler) is exceeded by some degrees, starts the cycle of
extinction, signaling on the display "COOLING WAITING", at the end of this cycle the
display signals "STAND-BY". In case the Mod. 698TP+698TPVT+698TPVT STEEL
(including kit of sanitary water production) is working in this modality, it is not possible to
produce sanitary water until the appliance will be working againg.
MENU 06 (status buzzer)
Within this Menu you can select the modality of buzzer.
OFF, no sounds.
ONLY ALARMS, sound only if the appliance is signaling an alarm.
ON ALWAYS, sound in case of alarm and at any touch of the buttons of the radiocontrol.
IT IT IT IT- - - - GB
64/120
GB- - - - FR FR mod. Serie 698TP....
GB GB FR FR