Lincar Annarita 698 TP Using Instructions And Maintenance page 47

Position selector circulator OPERATION ( In function
•
MAX
First functioning operation of heating installation
During the first hour of functioning, we recommend to employ the equipment on power 1
( minimum ) this to check the functioning of the entire heating installation to avoid that
"particular" temperatures are reached.
Connection to the chimney
Before connecting the appliance, verofy if the technical data reported on the technical
•
correspond to the ones you have required at the moment of purchaser.
All heating biomass equipments, especially wood and pellet appliances, have to evacuate
•
the combustion products in a flue, which must be built in conformity with normative in
force
The following instructions describe „ informations for a good installation „ and they refer
•
to normatives in force, but they are not to be considered exhaustive for installations laws
When the venting phase is finished, the
circulator selector has to be placed in the
same position as in the picture. (Rotate
clockwise at the stroke end).
47/120
IT IT IT IT- - - - GB GB- - - - FR FR mod. Serie 698TP....
GB GB FR FR
)