Reliance electric S-D4024 Engineering Manual page 50

Table G.1 - Bit Format of Serial Data Provided from Absolute Encoders Usable for the S-ABS II Card (continued)
Model
Number MSW1-4096-13N11-12
of Encoder
bit0
bit1
bit2
bit3
bit4
bit5
bit6
bit7
bit8
bit9 System down
bi10
bit11 External battery alarm
bit12 LED wire broken
bit13 Monitoring of clearing
bit14
bit15
Shows data for less than one revolution.
Shows data for revolution number of one revolution or more.
(1)
This bit is set to "ON" when the data for revolution number of one revolution or more exceeded the allowable revolution number
and normal data cannot be obtained. This bit status will be kept until clearing signal is entered.
(2)
This bit is set to "ON" when dara error was detected because the data for revolution number of one revolution or more exceeded
the allowable revolution number and normal data cannot be obtained or because of other reasons. This bit will be reset
automatically.
(3)
The S-ABS II Card cannot read these bits.
G-2
of IHI
2 (15)
2 (16)
2 (17)
2 (18)
2 (19)
2 (20)
2 (21)
2 (22)
2 (23)
Overflow
Error A in revolution
revolution of more
External battery alarm
input signal
L fixed
H fixed
AEF-013-2048
of Sumtak
2 (15)
2 (16)
2 (17)
2 (18)
2 (19)
2 (20)
2 (21)
2 (22)
2 (23)
System down
Overflow
number of one
(1)
External battery alarm
L fixed Error B in revolution
revolution of more
L fixed
H fixed
PSC5000 Serial Absolute Encoder Input Card II S-D4024
NAR-H11M-AD
of Nemicon
2 (15)
2 (16)
2 (17)
2 (18)
2 (19)
2 (20)
2 (21)
2 (22)
2 (23)
System down
Overflow
L fixed
Error B in revolution
number of one
(2)
revolution of more
L fixed External battery error
H fixed
NAR-H13M-AD
of Nemicon
2 (15)
2 (16)
2 (17)
2 (18)
2 (19)
2 (20)
2 (21)
2 (22)
2 (23)
(3)
2 (23)
2 (23) (3)
System down
Overflow
number of one
(2)
H fixed