Reliance electric S-D4024 Engineering Manual page 12

2-2
Important: The S-ABS II Card is for PSC5000 System, and cannot be used for
PSC3000 System.
Important: The S-ABS II Card can be used for the PSC5000 Control Card
operating system Version 1.31 or later.
Important: For programming the S-ABS II Card, PSC5000 Programming Terminal
Version 1.31 or later can be used. Any earlier version of the
Programming Terminal does not support use of the S-ABS II Card.
Important: Be careful that the S-ABS II Card prohibits use of the I/O monitor of the
Programming Terminal. For more information, refer to Section 5.2 of
this manual.
This manual describes the functions and specifications of the S-ABS II Card. It also
includes examples of external wiring and troubleshooting procedures, as well as
programming methods.
PSC5000 Serial Absolute Encoder Input Card II S-D4024