Table of Contents
Advertisement
2 Copies
Sets the number of copies.
You can set the number of copies from 1 to 255 sheets.
3 Print
When you click the [PRINT] button, the test print is performed.
The pattern selected in 1 is printed by the number of copies set in 2.
4. Self Check tab
1
2
3
4
5
1 [Preparation] button
Performs the preparation of self check.
When this button is clicked, "Before checking... Eject the paper. Close the door. Insert USB Flash Drive.
(UP-X898MD)" is displayed in the edit box 7.
According to the display, eject the paper, close the door and connect the USB flash memory (UP-X898MD
only).
2 [SENSOR|MOTOR|USB|HOST] button
Performs the self check of SDRAM, EEPROM, sensors, and DC motor and thermistor of thermal head in
this unit.
After the check is completed, if there is no defective portion, "Check Result No Error, Check OK!" is
displayed in the edit box 7.
If any defective portion is detected, it is displayed.
t
For the cause and remedy of the defective portion, refer to Section 2-1.
1-18 (E)
Self Check tab
6
UP-D898MD/X898MD
Advertisement
Table of Contents
