5. Close the door block assembly.
6. Remove the FFC guard (KY) from the portion A of the MD top chassis.
7. Remove the three screws and four hooks, then remove the front panel block assembly.
8. Remove the FFC guard (KY) from the flexible flat cable.
BVTT
Hook
2.6
BVTT
2.6
4
Hooks
9. To install, reverse the removal procedure.
UP-D898MD/X898MD
When attaching the flexible flat cable, route it
through the FFC guard (KY).
FFC guard (KY)
4
Hook
BVTT
2.6
Front panel block assembly
Flexible flat cable
Door block assembly
4
The illustration indicates UP-X898MD.
FFC guard (KY)
Portion A
MD top chassis
1-9 (E)