Dealing With Error Message; Running Courseware Lab Exercises - Tektronix TBS2000B Series User Manual

3. Push -More- Page 1/2 side-menu button.
4. Push the Update Course side-menu button.
5. Use the Multipurpose knob to scroll through the file list and open the course folder to load. Folder and file names are
shown in the Directory field at the top of the screen as you highlight each one.
6. Look for and highlight the folder that contains the file with the .workspace extension.
7. Push the Change Folder side-menu button to temporarily change the working folder to this location for reading the
courseware files. The selected folder is highlighted in the list.
8. Push the Upload Course side-menu button to load the course into your oscilloscope. The oscilloscope displays a brief
message saying that the file loaded successfully.

Dealing with error message

If you get the "No course material package files found" error message, make sure that you selected the folder that contains
the .workspace file, and not the .workspace file itself, or any other folders that may be in the Courseware folder.
In the following image, the .workspace file (colored blue) is part of the ST_AFG_EN_MathAddition_PKG folder (green
boxes), so you would highlight ST_AFG_EN_MathAddition_PKG to load this course. The Package_RSZI folder (red box) is
a subfolder of ST_AFG_EN_MathAddition_PKG.
If you still get a load error message, try downloading the courseware file again and reload it.

Running Courseware lab exercises

You can access the lab content by pushing the Course button located on the on the front panel. Use the oscilloscope's soft
keys and the Multipurpose knob to access up to 12 courses, which can have up to 14 labs each.
TBS2000B Series Oscilloscopes User Manual
Appendices
151