Important Safeguards; Read And Follow All Safety Instructions - ETC ColorSource CYC v1.7 Installation Manual

ETC Installation Guide
ColorSource CYC v1.7

IMPORTANT SAFEGUARDS

When using electrical equipment, basic safety precautions should always be
followed including the following:
READ AND FOLLOW ALL SAFETY
INSTRUCTIONS
Do not use outdoors.
•
Do not let power supply cords touch hot surfaces.
•
Do not mount near gas or electric heaters.
•
Equipment should be mounted in locations and at heights where it
•
will not readily be subjected to tampering by unauthorized
personnel.
The use of accessory equipment not recommended by the
•
manufacturer may cause an unsafe condition.
Do not use this equipment for other than intended use.
•
SAVE THESE INSTRUCTIONS
Note:
must be replaced only by a qualified technician. Contact ETC
Customer Support for assistance.
Environment
The ColorSource CYC operates in ambient temperatures of 0°C–40°C. The
ColorSourceCYC is for indoor use only.
Maximum recommended ambient operating temperature: Ta = 40°C
•
(104°F)
Maximum anticipated external surface temperature at 40°C ambient:
•
Tmax = 110°C (230°F)
External temperatures after 5 minutes of full-brightness operation at
•
25°C (77°F) ambient: 49°C (119°F)
External Temperature (steady state achieved) at 25°C (77°F): 88°C
•
(190°F)
ColorSource CYC
The light source in this luminaire is not user-replaceable, and
Page 2 of 12 ETC