Info Menu; Standard Info Menu - ResMed S9 VPAP Series Clinical Manual

Reminder menu
You can access reminders from the Clinical Menu > Options. From the REMINDERS screen, scroll down
to the submenus to set a number of different types of messages.
For a list of each of the reminders available and their default settings, see the table on the previous page.

Info menu

The Info menu consists of:
• Standard Info menu—provides patients with information about compliance, therapy and settings.
• Advanced Info menu—provides you with additional therapy settings and compliance information.

Standard Info menu

From the Standard Info menu, patients can check their sleep quality, sleep report and service information.
These parameters are available in all the therapy modes.
22
You can use the Reminder menu to alert a patient to specific events, such as
when to replace their mask (shown on the left) or when to insert an SD card.
When a reminder is due, a message is displayed on the LCD and remains
while the device is not delivering therapy. The backlight on the LCD flashes
when a message is displayed.
If more than one reminder for a patient is scheduled for the same date, all
scheduled reminders will be displayed.
Patients can clear each message by pressing any key (except the Start/Stop
button).
Sleep Quality—On
When Sleep Quality is set to On (via Setup > Clinical Setup > Options), data
on previous usage (up to 365 days of data), Mask Fit and AHI can be viewed.
Sleep Quality—Usage
When Sleep Quality is set to Usage, only the data on previous usage is
displayed.
Sleep Report
In Sleep Report, only the period can be changed—other values are for
display only.
Service
The Service information shows the device run hours, software version
and other component versions. Data on this screen may be requested for
servicing.