Simultaneous Run/Stop/Eco For Block - Hisense HYXE-J01H Service Handbook

HYJM-S01H
3. The confirmation screen will be displayed. Touch "OK" (All indoor units connected to the central controller will be simultane-
ously operated) . Touch "Cancel" to cancel this command.
(3)
1. Select the target block from the touchscreen display to set simultaneous Run/Stop/ECO operation.
2. Touch "Run by Block" or "Stop by Block" or "ECO by Block".
(1)
(2)
3. The confirmation screen will be indicated. Touch "OK". All groups (all indoor units) in the selected block connected to the
central controller will be simultaneously operated. Touch "Cancel" to cancel this command.
(3)
198