Button Description - Hisense HYXE-J01H Service Handbook

Model： HYE-W01
●
Wireless remote control is a device transmitting instructions on operation
mode and time setting to indoor unit. Point the remote control to signal receiver on indoor unit and
press relevant button to send IR signals for communication.
●
The maximum transmission distance is about 5 meters (the distance may be shorter when
transmission path of IR signals is not perpendicular to the receiver or there is any electronic
lighting device nearby).
ECO
Cool
Mode
A i r Timer
v e l o
S.H.
Green

Button Description:

Press the button to start remote
control, and press it again to shut
Start/Stop:
down the remote control.
Used to set operation mode
Cool
to cooling
Speed
For selection of airflow velocity
Press it to operate air conditioner
ECO
in power-saving mode
Press it to operate air conditioner
Sleep
in sleep mode
Press it to operate air conditioner
S.H.
in strong heating mode
Hor
Airflow
Ver.
Direction
Reset
Heat
.
Hor.
Ver
3D/S.
Mute
Sleep
Reset
Set horizontal airflow
direction
Set vertical airflow
direction
● After cleaning of filter screen is finished, long press Mute to remove Filter Screen
indication on indoor unit.
●When any protective device stops operating, long press Mute to cancel control after
the failure has been removed.
Wireless Remote Control Switch
Signal
This indicator will keep flashing while signals are being
transmitted(with remote control pointed straightly to the
receiver on indoor unit).
Signal
Display
Displays set temperature, operating time, air deflector
position, operation mode and air volume type.
Since all available information is displayed on the
screen as shown in this manual, actual display may
vary depending on the operation status.
For toggling between operation
Mode
modes
Used to set operation mode to
Heat
heating
Used for setting of indoor
Temperature
temperature
3D/S.
Used to set 3D/strong airflow
Press it to operate air conditioner
Mute
in mute mode
Press it to operate air conditioner
Green
in health mode
After shutdown, press it to schedule start-
-up of the air conditioner
After start-up, press it to schedule shutdown
Timer
of the air conditioner
When any sc heduled start-up/shut down
has been set, press the button to cancel it
11