Installation & Operation Manual for Wireless Remote Control Remote Control Mode: HYE-W01 To ensure correct use of this remote control, please read this manual carefully before use. This manual should be read along with the installation manual for air conditioner.
4.Product Description Wireless remote control ● Wireless remote control is a device transmitting instructions on operation mode and time setting to indoor unit. Point the remote control to signal receiver on indoor unit and press relevant button to send IR signals for communication.
5. Signals Transmission * Point signal transmitter on remote control to the receiver on indoor unit. * Send signals as closely to indoor unit as possible, and make the remote control perpendicular to the plane where the receiver is located, or otherwise the signal transmission distance may be shorter.
Page 5
■ Setting of Cooling/Heating/Dehumidifying/Air Supply Operation and other Functions Cooling ● Dehumidify Cool room ● Reduce humidity of air in room operation room ● ● Heating Air-supply Circulate air in room Heat room operation operation ● Automatic Cool or heat room automatically operating For protection of Tips...
Page 6
■ Operations on Temperature/Airflow Volume/Direction Point signal transmitter on remote control to the receiver and press the button. Tempe Each press on it will increase temperature by 1℃. rature (The maximum available temperature is 30℃) Each press on will reduce temperature by 1℃. (The minimum temperature is 16℃) Indicates temperature of 28℃...
Page 7
■ Operations on Scheduled Start-Up Operation and Functions ● Scheduled task means that the unit will be started or shut down when a set time has elapsed. ● Scheduled start-up or scheduled shutdown can be set. If the Timer button is pressed down when air conditioner is power-off, the unit will be started when the set time has elapsed.
Page 8
Operations on Power Saving/Mute/Sleep The f ollowing additional functions are available in some models. For more details consult your local dealer. When air conditioner is power-on: Point signal transmitter on remote control to the receiver and press the button. Power sav ing Air conditioner starts operation in power saving mode and the power saving icon is...
Page 9
Operations on Strong Heating/3D/Strong Airflow/Health Mode The f ollowing additional functions are available in some models. For more details consult your local dealer. Point signal transmitter on remote control to the Strong receiver and press the button heating Air conditioner starts operation in strong heating mode and Strong Heating icon is activated on the screen of remote control.
7. Mounting Remote Control on Wall □ Note: When remote control is mounted on wall, the receiv er on indoor unit may fails to receiv e signals from it when the remote control is manipulated. In such case, remov e the remote control f rom wall and then manipulate it by pointing it toward the receiv er.
Page 11
Qingdao Hisense-Hitachi Air Conditioning System Co. Ltd. Address: 218, Qianwangang Road, Economic and Technical Development Zone, Qingdao Postal Code: 266510 Customer service: 4006-111-111 (ext. No.7) E-mail: hhcsc@hisensehitachi.com M00038Q 2016.12...