Wireless Receiver Kit
HYRE-X01H
)
1 Install the wireless receiver kit,the indoor unit and the air panel at the same time.
2 In case that the wireless receiver kit is installed after installing the indoor unit ,turn off the power
)
source of the indoor unit and remove the air panel.
3 This receiver kit can be installed at the position of signal receiver corner plate.
)
Signal receiver corner plate
)
4 Remove the cover of indoor unit electrical box and connectthe cable to the
terminal board as shown below.
) 5 Connect the connector with the lead wire on the terminal
NOTES:
The excess part of the wire is tied to the ceiling or outside the machine
Indoor machine wiring interface
Sign"A"
Sign"B"
Electric box
relay connector
Connecting Cable
102