System Configuration - Hisense HYXE-J01H Service Handbook

HYJM-S01H

4.3 SYSTEM CONFIGURATION

This central controller (HYJM-S01H) is connected to H-NET and used for the central control and monitoring of the air conditioners.
The system configuration example is shown in below.
4.4 INSTALLATION PROCEDURE
The installation procedure shall be performed as shown below.
Remote Control
Switch Wiring
HYJM-S01H
Remote
Control
Group3
Block2
Remote
Remote Control Control
Group1 Group2
Block1
Remote
Remote Control Control
Group4 Group5
Block3
Start
Preparation at the Site
Installation
Wiring
Test Run
182
Outdoor
Unit1
Transmission Wiring
(H-NET)
Outdoor
Unit2
Max.64 remote control groups and
Max 160 indoor units are available.