Setting Target Selection And Monitoring Operation Status - Hisense HYXE-J01H Service Handbook

HYJE-D02H
9. Operation Procedure
A. Setting Target Selection and Monitoring Operation Status
The central station can control up to 64 groups by each group, each zone or simultaneously .
( The selected setting target can be operated and the unit operation status can be monitored.)
ATTENTION:
When changing the zone No. by depressing the "ZONE" switch, the zone, which is not set as group, is not indicated.
The group number is changed by depressing the "GROUP" switch. The group without group setting is not indicated.
Preparation 1
Supply power to the unit.
ATTENTION:
A. Supply power to the unit more than 6 hours before unit operation for compressor protection.
B. Do not cut off power during the term of using air conditioner.
Preparation 2
After the preparation for air conditioner operation is completed,
turn ON the power supply of the central station.
1. Depress the "ZONE" switch.
Every time the "ZONE" switch is depressed, the zone and group
No. to be controlled is changed in the order as shown below.
A-AA
When the zone is changed, the setting target group is AA (All
Groups) initially.
For example, depressing "ZONE" switch when the setting target
is 1-02, the indication is changed to 2-AA.
2. Depress the "GROUP" switch.
Every time the "GROUP" switch is depressed, the zone and
group No. to be controlled is changed in the order as shown
below. In case of "AA", all the units are controlled
simultaneously.
ZONE GROUP
A-AA
ZONE GROUP
A-AA
ZONE GROUP
A-AA
ZONE GROUP
A-AA
1-AA 2-AA 3-AA
ZONE GROUP
ZONE GROUP ZONE GROUP
1-AA 1-01 1-02
ZONE GROUP ZONE GROUP ZONE GROUP
2-AA 2-01 2-02
ZONE GROUP ZONE GROUP ZONE GROUP
3-AA 3-01 3-02
ZONE GROUP
ZONE GROUP ZONE GROUP
4-AA 4-01 4-02
The setting target zone and group No. is
indicated on the liquid crystal display.
Zone No. is changed.
(ex. In case of All group in Zone 3)
4-AA
Only Zone No. Already Set are indicated.
Group No. is changed.
(ex. In case of selecting Zone 3, group 5)
ZONE GROUP
1-16
ZONE GROUP
2-16
ZONE GROUP
3-16
ZONE GROUP
4-16
138
Only Group Nos. Already Set
are indicated.