Cancelling Route Guidance; Muting Navigation Announcements; Searching For A Point Of Interest On The Route Or Near The Destination; Displaying Destination Information - Bosch Center CM-C 19 Operating Instructions Manual

Navigation
or:
f Tap in the map view.
or:
f Tap the Route tab in the Destinations menu.
The Route menu is displayed:
Destinations
Route New Previous
Stop guidance Destination info
Mute guidance Show route list
POIs on route Block route list
POIs at destination Waypoints
For the available settings and options, please
refer to the following sections.
Note:
In the Destinations menu, tap
return to the map view.
10.8.2 Cancelling route guidance
f In the Route menu, tap Stop guidance.
The currently active route guidance session is
cancelled.
10.8.3 Muting navigation
announcements
f In the Route menu, tap Mute guidance or
Unmute guidance to activate or cancel mute
respectively.
10.8.4 Searching for a point of
interest on the route or near
the destination
During an active route guidance session, you
can select a point of interest on your route or
near your destination as the destination.
Note:
Favourites
If your current route goes directly to
the ultimate destination, you can add
the new point of interest as a waypoint
or replace the ultimate destination with
the new point of interest.
If your current route already goes via a
waypoint to the ultimate destination,
you can either replace the waypoint or
the ultimate destination with the new
point of interest.
to
f In the Route menu, tap POIs at destination
or POIs on route.
The available point of interest categories are
displayed. Continue reading the section entitled
"Selecting a point of interest and starting route
guidance" (page 49).
10.8.5 Displaying destination
information
f In the Route menu, tap Destination info.
Your current destination is displayed in the
details view (see the section entitled "Location
details view" (page 51)).
to return to the Destinations menu.
f Tap
10.8.6 Displaying the route list
f In the Route menu, tap Show route list.
The route sections up ahead on your journey are
displayed.
f Tap to return to the Destinations menu.
Note:
You can block a route section by double
tapping the corresponding entry in the
route list (also see the following sec-
tion).
10.8.7 Blocking route sections
You can block route sections that lie up ahead
on your route and thus exclude them from the
route. The navigation system automatically
calculates a suitable alternative route.
Selecting route sections to block
f In the Route menu, tap Block route list.
The route sections up ahead on your journey are
displayed.
Note:
You can block an individual route sec-
tion or several consecutive route sec-
tions.
f Tap the desired route section.
Or:
If you want to block several route sections:
f Tap the first route section you want blocked.
f Tap the final route section you want blocked.
en | 55