Calling Up The Tuner Display; Rds; Af Mode - On/Off; Regional Mode - On/Off - Bosch Center CM-C 19 Operating Instructions Manual

FM/AM radio mode
RDS is supported in your receiving area
or by the current station.
5.3 Calling up the tuner display
While you are listening to the radio:
f In the home menu, tap the main area of the
radio tile.

5.4 RDS

Note:
If RDS is not supported in your recep-
tion area or by the current station, you
will not be able to experience these
functions.
This device is equipped with an RDS radio
receiver. Many FM stations transmit a signal that
not only carries the radio programme but also
information like the station name. The station
name appears in the display as soon as the tuner
receives it.
The convenient RDS functions "Alternative
Frequency" and "Regional Mode" enhance the
performance of your tuner:
Alternative frequency (AF): The device auto-
f
matically performs a background search for
the best reception frequency for the tuned
station.
Regional mode: Some radio stations divide
f
their schedule at certain times into regional
programmes offering different content. You
can enable or disable regional mode. With
regional mode enabled, the device is pre-
vented from switching to alternative frequen-
cies for the tuned station that have different
programme content.
5.4.1 AF mode – on/off
f In radio mode, tap the bottom menu tab (13)
and then tap the button.
Radio options
Sound settings
Show radio text
Show tra c announcements
Regional programme
Alternative frequency search
f Tap Alternative frequency search.
AF mode is enabled when the check mark is
displayed in the checkbox.
f Tap to leave the menu.
5.4.2 Regional mode – on/off
f In radio mode, tap the bottom menu tab (13)
and then tap the button.
Radio options
Sound settings
Show radio text
Show tra c announcements
Regional programme
Alternative frequency search
f Tap Regional programme.
Regional mode is enabled when the check mark
is displayed in the checkbox.
f Tap to leave the menu.
5.5 Selecting the waveband
While you are listening to the radio:
f Tap (1) in the tuner display.
Note:
You will also find the button in the
Home menu.
f Tap the desired waveband.
The tuner display for the selected waveband is
displayed.
en | 29