Tuning Stations; Tuning Stations Manually; Starting Seek Tuning; Station List - Bosch Center CM-C 19 Operating Instructions Manual

30 | en
5.6 Tuning stations
5.6.1 Tuning stations manually
f Tap (3) or (7) once or several times to
adjust the frequency incrementally.
5.6.2 Starting seek tuning
f Tap (10) or (11) to tune to the next or
previous station in the reception area.
Note:
By long-tapping (10) or
adjust the frequency continuously.
After you release the button, the radio
tunes to the next station automatically.
5.6.3 Station list
Note:
This function is only available in the FM
waveband.
All currently receivable radio stations are dis-
played in the FM station list.
f Tap the button (12).
The FM station list is displayed.
f Tap the desired radio station.
To return to the tuner display,
f tap .
5.6.4 Scanning receivable stations
f Tap SCAN (15).
The receivable stations are played one after
another for around 10 seconds each.
To continue listening to the station that is cur-
rently being scanned,
f tap SCAN (15) again.
5.7 Storing stations
f First select the desired memory bank, if
necessary, and tune to the desired station.
f Long-tap one of the memory preset buttons
(14).
(11) you
The currently tuned station is then stored to the
memory preset button.
5.8 Listening to a stored station
f First select the desired memory bank, if
necessary.
f Short-tap one of the memory preset buttons
(14).
The stored station is played.
5.9 Radio-text display – on/off
Note:
If the stations in your reception area do
not support RDS or HD Radio, you will
not be able to use this function.
f In radio mode, tap the bottom menu tab (13)
and then tap the
Radio options
Show radio text
Show tra c announcements
Regional programme
Alternative frequency search
f Tap Show radio text.
Displaying of radio text is enabled when the
check mark is displayed in the checkbox.
f Tap
5.10 Traffic announcement
5.10.1 Traffic announcement priority
f In radio mode, tap the bottom menu tab (13)
and then tap the
Radio options
Show radio text
button.
Show tra c announcements
Regional programme
Alternative frequency search
FM/AM radio mode
Sound settings
to leave the menu.
Note:
If the stations in your reception area do
not support RDS, you will not be able
to use these functions.

– on/off

button.
Sound settings