Table of Contents
Advertisement
D-Link DAP-2622 User Manual
The PVID Settings tab is used to enable/disable the Port VLAN Identifier Auto Assign Status as well as to configure various types of PVID settings.
Click the Save button to let your changes take effect.
VLAN Status:
Click the radio button to enable or disable
VLAN status. By default this feature is
disabled.
VLAN Mode:
Displays the current VLAN mode.
PVID Auto Assign
Click the radio button to enable or disable
Status:
PVID auto assign status.
For each untagged port, set the PVID of the
port to its assigned VLAN ID. For example, if
ports 1, 2, 3, 4, and 5 are untagged members
of VLAN 10, ports 1, 2, 3, 4, and 5 would be
configured with a PVID of 10.
For better system consistency, the following
are recommended:
y set MSSID ports S1 and S2 to 16 and 17,
respectively
y set switch port trunk native VLAN 1 for
trunk port 1
Save:
Click to save the updated configuration.
To make the updates permanent, click
Configuration > Save and Activate.
PVID Settings
35
Advertisement
Table of Contents
