Table Of Contents - Digi Connect ME Hardware Reference Manual

Contents
About this document
Scope of the reference manual
Related documentation
About the Digi Connect ME family of embedded modules
Digi Connect ME and Wi-ME embedded modules
Types of modules
Connectors: power and device interface
Difference in pin assignments/availability
Power and device interface connector
Connectors: module JTAG interface
JTAG interface connectors
Connectors: Ethernet interface
Ethernet interface pin orientation
JTAG jumper
Hard reset
Connectors: antenna
Module LEDs
About the development board
Basic description
Board layout and connector locations
Placement of module
Port descriptions
Primary serial port, P1
Secondary serial port, P2
RS232-enable pin header, P5
GPIO port, P7
Connectors and blocks
Embedded module connector, P10
Module JTAG interface connector, P11
JTAG debugger connector, P12
Logic analyzer header, P3
Switches and push buttons
GPIO switch bank 1, SW3
User push button 1, SW1
User push button 2, SW2
Reset, SW4
Digi Connect ME, Wi-ME, ME 9210, Wi-ME 9210 Hardware Reference Manual
7
7
9
9
11
11
11
13
13
15
15
15
16
16
16
19
20
22
22
22
23
24
24
24
24
26
27
28
29
29
29
29
29
4