Performing Iop Correction With The Myopia Master - OCULUS Myopia Master Advanced Instruction Manual

17.4 Performing IOP correction with the Myopia Master®
Instruction Manual Myopia Master® (G/68100/EN Rev04 0820)
17 Calculated correction of tonometrically measured IOP

Select an IOP-Table in the menu "Settings 1"

Perform a P+AR+K or a PARK + AXL measurement
The results screen appears for the examined eye:
1 IOP change field
Fig. 17-3: IOP change
The IOP change value is displayed in the IOP change field (1). Depending
on the formula which is used, the IOP change value is either a summand
or a factor.

Turn the control wheel until the "IOP Chg." field is activated.

Press the control wheel.
The field for entering the tonometrically measured IOP value appears:
Fig. 17-4: Entering tonometrically measured IOP manually
(sec. 15.1, page 52).
(sec. 12, page 28).
1
65 / 92