Valley Picker (Not Available On Gst Channels) - Ametek Land LMG GS User Manual

Signal Processor

4.4 Valley Picker (not available on GST channels)

Refer to Fig. 34. This function is the inverse of the Peak Picker. It allows the
operator to find the minimum peak value instead of the largest peak value.
Threshold level:
ON/OFF delay:
Recovery rate:
IRT max
Threshold
0V
Valley Sample:
For typical Valley Sample responses, see Fig. 35.
Page 44
Temperature below which the Valley Picker is active,
used in conjunction with on/off delays.
See Peak Picker.
A user adjustable rate at which the stored temperature
recovers.
Time
Command
Fig. 34 - Typical output of Valley Picker function
This function allows the unit to Valley pick for a
user-defined period before the output/display are
updated. (Interval 10 to 250 seconds in 1second steps).
User Guide
Output
+V
238034
LMG GS