Getting Started (Accessing The Menu System) - Ametek Land LMG GS User Manual

Signal Processor

3.1 Getting Started (accessing the menu system)

When the processor is first connected to a thermometer and a suitable power
supply, the processor display will be similar to that shown in Fig. 19.
To access the configuration menus, and set up your system to your particular
requirements, press the (ENTER) key.
The processor display will now be similar to that shown in Fig. 20. A 'Help' bar is
displayed below each menu, explaining the function of the (UP), (DOWN) and
(ENTER) keys for that specific menu.
Page 26
Fig. 19 Typical front panel display
User Guide
238019
LMG GS