Table of Contents
Advertisement
Signal Processor
3.3 Configuring Items in the Menu System
(i)
To select an item from the Main Menu use the UP and DOWN keys to
move the
(ii)
Press the ENTER key.
The sub-menu relating to the item selected from the main menu is
activated.
If there is only one item that can be changed in the sub-menu the cursor
becomes a
If there is more than one available item to be changed in the sub-menu
the cursor becomes a
(iii) Use the UP and DOWN keys to select the required item and press the
ENTER key.
The NOTE area, at the bottom of the sub-menu, gives the range of
available settings for the selected item.
(iv) The cursor will now become a
select the required value/option for the selected item.
NOTE
In the 'LABEL' sub-menu, a Japanese set of characters is present in each
of the other language character sets (e.g. English or German). These can
be scrolled through and selected if required.
(v)
Press the ENTER key.
If there is only one item that can be changed in the sub-menu, pressing
the ENTER key de-activates the sub-menu and moves the
the most recently selected item in the Main Menu.
If there is more than one item that can be changed in the sub-menu,
pressing the ENTER key reverts the cursor back to a
recently changed item.
Page 32
cursor to the required item.
u
BLOCK
.
at the top of the list of selectable items.
u
BLOCK
. Use the UP and DOWN keys to
User Guide
cursor to
u
next to the most
u
LMG GS
Advertisement
Table of Contents
