Configuring Constants For Gst Thermometers - Ametek Land LMG GS User Manual

Signal Processor

3.4 Configuring Constants for GST Thermometers

Enter the Main Configuration Menu (Fig. 21) in the normal way and select the
channel to be configured.
If an algorithm thermometer card is fitted, then the channel configuration menu
will be typically displayed as in Fig. 24, showing the first valid thermometer
type, if it is the first time that the menu has been selected. Alternatively, the
currently selected thermometer type may be displayed.
NOTE
The emissivity/non-greyness menu option has now been replaced with the
Constants menu option.
Fig. 24 - Example of GST Channel B configuration menu
Pressing the ENTER key will now allow the user to select one of the valid
thermometers for the card type fitted.
Having selected the required thermometer using the UP and DOWN keys, press
the ENTER key.
Position the cursor onto the Constants option and press the ENTER key.
The display changes to either 'Calibrate Mode' (Fig. 25) or 'Measure Mode'
(Fig. 26), depending upon which mode the unit is configured in.
Page 34
User Guide
238024
LMG GS